[flippydrive]
# Default boot mode, values are "normal" and "bypass"
# Setting "bypass" will always boot from the disc drive unless X is held down,
# at which point you can choose cubeboot, swiss, etc.
boot_mode = normal

[cubeboot]
# Custom cube logo color - Supports RGB hex colors aka websafe colors
# Keep the line commented out to use original logo color
# Setting "random" shows a random color
# cube_color = 660089

# Enable booting through Swiss for all games
force_swiss_default = 0

# Force progressive scan inside the IPL menu
force_progressive = 0

# Disable MemCard PRO GC Support
disable_mcp_select = 0

# Used for waiting for GCVideo to initialize
preboot_delay_ms = 0

# Delays loading after the boot logo
# to mimic the load times you would usually experience when booting a disc
# postboot_delay_ms = 3000

# Experimental configuration options below
#
# This enables folder icons and game icons which are still a little buggy
# enable_experimental_png = 0
#
# This enables the cube logo feature which replaces the word 'GAMECUBE' on the boot animation
# cube_logo = somelogo.png

[network]
# All network features require a server to be set and running the FlippyDrive app
# Wi-Fi connections also require a SSID and password

# Sets the network interface as the default disc device (active is 1)
# cubeboot can use other network features regardless of setting
is_default = 0

# Server IP address, in either IPv4 or IPv6 format. Port is 7031
server = 198.51.100.1

# SSID of your network
ssid = MyAwesomeNetwork

# Network key
password = correcthorsebatterystaple